MS-20 Plus is a highly flexible, solvent- and water-free universal parquet adhesive. Suitable for gluing glued and solid wood parquet with tongue and groove joint on suitable indoor substrates.
Characteristics
- Elastic
- EC-1R PLUS label: very low emission
- Ready to use, single component
- Solvent free
- Contains no water
- Free of isocyanates
- Easy to apply
- Forms stable peaks once applied by a notched trowel or spreader comb
- Rapid cure and build up of final bond strength
- High final bond strength (according to EN14293)
- Suitable for underfloor heating
- Avoids staining of the hands
Application
- MS-20PLUS is a solvent, and water-free universal parquet adhesive based upon polymers. Suitable for indoor bonding of engineered boards ready to use parquet and solid wood.
- Suitable for use on porous and non-porous substrates such as mosaic, anhydrite, concrete, screeds, wood, chipboard and OSB Board (large particle size chipboard) , including floors with underfloor heating and cooling
Surfaces
- MS-20PLUS should be acclimatised to room temperature before installation. Apply the adhesive to the surface by means of notched SOUDAL trowel N°11. For parquet sizes smaller than 60mm wide and 300mm long notched SOUDAL trowel N°3 is recommended. Do not apply more to the surface than can be covered with parquet within 30 minutes. Slide the parquet onto the adhesive layer and tap into place or tamp down with a rubber hammer.
- A minimum of 80% contact coverage is required to ensure a perfect adhesion. Loading the parquet with weights will improve the final bond strength.
- Wait at least 24 h before sanding and finishing the parquet.
- Uncured MS-20PLUS may be removed from tools and parquet with SOUDAL Adhesive cleaner or SWIPEX. Cured adhesive must be removed mechanically.
Technical characteristics
- Base - silane polymer
- Consistency - paste
- Curing (polymerization) - chemical treatment
- Density - Approx. 1.75 g/ml
- Temperature resistance - from -40 °C to +90 °C (cured)
- Open time (23 °C, 55 % RH) - 25 - 30 min
- Adjustable up to 25 - 30 min
- Shear resistance > 1.00 N/mm²
- Can be loaded after min. 8h
- Can be sanded / painted after min. 24 hours
- Resistance to aging - good
- Operating temperature 15 °C → 25 °C
- Color - light brown
- Consumption - depending on the surface and trowel:
- Glue stick B3: 700-900 g/m²
- Cell B11: 900-1200 g/m²
The color tones on the screen are reproduced electronically. They may differ from the actual color tone because our color perception is affected by the surface of the material, glare, lighting, and other factors. To accurately determine a color shade, we recommend that you use real color shade catalogs, always be confident in your choice, and use the color shade catalogs in an environment or conditions similar to those for which you choose a color.
The image of the product is informative. Specifications may vary depending on configuration and size. Fittings and their location may vary.
Contact our customer service for further information www.ventum.lv
Email: [email protected], contact number: +371 25438606 (doors and furniture), +371 29 383 382 (building supplies)
Similar products
-25%
