PENOSIL Standard Neutral Silicone 280 ml

Product description

Values

• Insulates and seals in both indoor and outdoor conditions.
• Adheres to most building materials, such as: stone, metal and wood materials, glass and plastic surfaces.
• Excellent processing and smoothing properties.
• Non-sagging, does not spread in the joint.
• Permanently elastic.

Application areas

• Insulation and sealing of connections, also on surfaces where acid curing silicone cannot be used.
• General construction and repair works.
• Interior and exterior works, wet and dry rooms.
• All finishing, insulation and ventilation works.
• Insulation and sealing of window and door frames.

Adheres to

• Concrete
• Masonry
• Brick
• Wood
• Construction boards
• Aluminium (lacquered, anodized, painted)
• PVC and most plastics
• Ceramics
• Glass

Package

280 ml cartridge,
12 cartridges in box.

Tips

• The surfaces must be clean from fat, oil, dust and loose particles.
• The surface to be covered must be dry.
• Ensure adequate ventilation in all joint locations.
• During the curing process, make sure that no impurities can settle on the surface and that the joint surface is not affected by mechanical load.
• Do not use at temperatures below +5 °C.

Limitations

• Do not use for sealing aquariums and underwater joints.
• In contact with natural stones, such as: marble, granite, quartzite may cause stains.
• Cannot be painted.
• Do not use on bituminous substrates or on building materials which might bleed oils, plasticizers or solvents (e.g. natural rubber, chloroprene, EPDM, …).
• There is no adhesion to PE, PP, PTFE (Teflon®). Due to the wide variety of possible substrates, we recommend a preliminary compatibility and adherence test. If necessary, prime surfaces to improve adhesion.
• Not intended for structural glazing or IG-sealing.
• Not intended for weather sealing glass façade joints.