-8%
Ready-to-use, self-expanding, one-component polyurethane adhesive. Intended for rational, clean, economical and long-term safe gluing of polystyrene foam boards in WDV (external wall thermal insulation) systems approved by building supervision.
Color: orange
Packaging: Aerosol Balloons 750 ml
Characteristics
- Rational and simple assembly/handling, no mixing required – no preparation time required – no tools/equipment cleaning required
- Significant weight reduction / significant space gain compared to previous adhesives
- Already after approx. 2 hours can be processed
- One 750 ml bottle is enough for approximately 12 m²
- Free of HFCKW and FCKW (Montreal Convention)
- The gas "propellant" is completely harmless to the ozone layer
- Does not contain solvents
- Very low emission - EC1R PLUS licensed
- Excellent thermal insulation
- Excellent shape stability, i.e. does not lose volume once the hardening is over
- Excellent adhesion to almost all substrates (except PE, PP, PTFE and silicone)
- Fast curing
- Resistant to various solvents, paints and chemicals
- Resistant to aging, does not rot, is not resistant to UV radiation
- Water resistant (but not waterproof)
- Difficult to ignite according to DIN 4102-1
- Free, easy and complete packaging disposal thanks to the PDR system
Application
- For efficient, clean, rational, economical, durable and safe gluing of thermal insulation boards in WDV (external wall thermal insulation system) systems approved by building supervision
- For gluing polystyrene, polyurethane, foamed phenol (PUR, PIR, XPS, EPS, PF), as well as mineral wool and cork to concrete, bricks, stone, wood and metal (e.g. for insulation of containers, garages, etc.)
- For flat roofs, building perimeters, facades, drainage elements, basement ceilings, interiors
- For plasterboard gluing/ plasterboard gluing on dry plaster
- For gluing decorative plates, wood-like materials, plastics, metal sheets, etc. for gluing
- For filling gaps between individual thermal elements
- For gluing aerated concrete blocks and porous ceramics for gluing partitions (not constructively loaded) in small architecture
Technical characteristics
- Base - 1K polyurethane
- Consistency - persistent adhesive foam (does not clump)
- Drying system - under the influence of air humidity
- Drying speed - approx. 30 minutes – 30 mm adhesive strip
- The surface loses its stickiness - approx. 8 minutes - 30 mm glue strip
- Cuttable - approx. 40 minutes - 30 mm glue strip
- Fully loadable - approx. 12 hours - 30 mm adhesive strip
- Additional expansion - small
- Thermal conductivity (DIN 52612) - approx. 0.0354 W/ (m·K)
- Tensile strength (DIN EN 1607) - 0.18 N/mm²
- Shear strength (DIN 53427) - 0.12 N/mm²
- Bending strength (DIN5342) - 0.6 N/mm²
- Pressure resistance (ISO844) - 0.3 N/mm²
- Temperature resistance -40ºC to +90ºC / +120°C (up to max. 1 hour)
- Elongation at break ~ 25%
- Water absorption (DIN53428) <1%
- Shrinkage <3%
- Fire protection class of building materials - B 1
- Consumption - approx. 12 m² of balloon (30 mm adhesive strip)
The color tones on the screen are reproduced electronically. They may differ from the actual color tone because our color perception is affected by the surface of the material, glare, lighting, and other factors. To accurately determine a color shade, we recommend that you use real color shade catalogs, always be confident in your choice, and use the color shade catalogs in an environment or conditions similar to those for which you choose a color.
The image of the product is informative. Specifications may vary depending on configuration and size. Fittings and their location may vary.
Contact our customer service for further information www.ventum.lv
Email: [email protected], contact number: +371 25438606 (doors and furniture), +371 29 383 382 (building supplies)
Similar products
