-8%
FLEXIFOAM GUN is a ready -made single -component polyurethane foam for use with mounting foam guns. Flexifoam is an ecologically clean product that does not contain ozone -hazardous gases. Flexifoam Gun foam is characterized by minimal expansion after the application (less than 50%), so they are very economical, and are characterized by high elasticity and excellent acoustic properties.
Color: blue
Packaging: Aerosol Balloons 750 ml
Characteristics
- Very high flexibility
- Resistance to extreme mechanical offset
- Excellent adhesion with most substrates (except Teflon, PE and PP)
- High thermal insulation and acoustic insulation
- Very well filled the voids
- Excellent stability (after curing does not shrink and expel)
- A very accurate application using a mounting gun
- Low expansion
- Congestability
Application
- Use in compounds with great movement
- Use in vibrating buildings
- Use as mounting foam reduction in acoustic noise
- Protection against shocks and shocks
- For assembly of window and door frames
- Filling the gaps
- Construction of partitions; sound isolation
- The assembly of insulation materials in the royal work
- Engine sound insulation
- Improvement of thermal insulation in cooling/heating systems
Technical characteristics
- Material - polyurethane
- Consistency - Stable willotropa foam
- Cure mechanism - polymerization of moisture
- Surface film formation - approx. 6 min. (20 ° C, relat. Moisture 65%)
- Cure duration - dry after 20-25 minutes.
- Hardening speed - 60 min. 30 mm depth (20 ° C, relat. Moisture 65%)
- Foam consumption - approx. 35 l foam from 1000 ml (depending on temperature and humidity)
- Shrinkage - no
- Double expansion effect - low
- Structure - isolated cells
- Density (ISO EN 1845) - approx. 25 kg/m³ (completely hardened)
- Thermal resistance - from -40 ° C to +90 ° C (completely hardened) temporarily +120 ° C, max. 1 h
- Fire resistance class (DIN4102 Teil 1) - B2
- Water Absorption <1% Volume
- Acoustic resistance (EN ISO 717-1)-RST, W (C; CTR) = 60 (-1; -4) db
- Multiple compression (ISO 1856) - up to 50% - recovery after 22h - loss is 6%
- Thermal insulation (DIN 52612) - 0.0345 W/ MK (watts per meter after Kelvin/ coefficient)
- Pressure Power (DIN 53421) - 0.5 N/cm²
- Lacking extension (DIN 18540) - approx. 30%
- Maximum Power Supper (DIN 18540) - 5 N/CM²
- Persistence threshold to shrink (DIN 53423) - 7 n/cm²
- Tensile strength (DIN 53427) - 3 n/cm²
The color tones on the screen are reproduced electronically. They may differ from the actual color tone because our color perception is affected by the surface of the material, glare, lighting, and other factors. To accurately determine a color shade, we recommend that you use real color shade catalogs, always be confident in your choice, and use the color shade catalogs in an environment or conditions similar to those for which you choose a color.
The image of the product is informative. Specifications may vary depending on configuration and size. Fittings and their location may vary.
Contact our customer service for further information www.ventum.lv
Email: [email protected], contact number: +371 25438606 (doors and furniture), +371 29 383 382 (building supplies)
Similar products
