Bauroc thermal insulation boards RENOVE 100

Description

Thermal insulation plates RENOVE 100 are used for internal insulation of the external walls of historic brick or masonry buildings, as well as for buildings whose facades require renovation and external thermal insulation is not allowed. In houses built during the Soviet era, RENOVE 100 thermal insulation boards are suitable for insulating external walls built from bricks, blocks or panels. Although the products are intended for internal insulation of old masonry walls, they can also be used for external insulation.

In addition to good thermal insulation properties, RENOVE 100 thermal insulation boards are strong enough to be used to fasten wall cabinets and cornices to them. In addition, these thermal insulation boards do not need to be additionally finished with plasterboard boards. Aerated concrete has good capillary conductivity of water, it is a capillary active insulation material. This means that in a critical situation, if moisture condensation forms on the inner surface of the old wall of the building during the cold season, it will move towards the warm room and evaporate into the air due to the capillary moisture conduction ability.

Unlike vapor-tight thermal insulation, RENOVE 100 insulation boards allow the inner layer to dry out in the summer, eliminating the risk of moisture condensation under the insulation layer during hot summers.

Technical data

• Dry density - 375 kg/m³ (±30 kg/m³)
• Size (width x height x length): 100 x 400 x 600 mm
• In a pallet - 1.44 m3 / 60 pcs.
• Average compressive strength - 2.5 N/mm²
• Thermal conductivity λ10, dry - 0.09 W/mK

Important: a security deposit of EUR 11.00 per pallet is charged for the wooden pallets on which the blocks are delivered. After returning the pallet, the security deposit is returned.