Knauf UW 0.6 mm steel profile for dry ceiling and wall cladding.
U - profile cross-section according to EN 14195, W - wall (German Wand). In classic drywall constructions, the UW profile is used as a guide. It is mounted horizontally on the floor, ceiling or wall and is attached to the ends of the CW, MW and UA profiles.
U - profile cross-section according to EN 14195, W - wall (German Wand). In classic drywall constructions, the UW profile is used as a guide. It is mounted horizontally on the floor, ceiling or wall and is attached to the ends of the CW, MW and UA profiles.
Technical information
- Profile height: 40 mm.
- Profile width: 50, 75, 100, 125, 150 mm.
- Profile length: 3000, 4000 mm.
- Metal thickness 0.6 mm. Complies with EN 14195 and meets the requirements of DIN 18182: 1: 2007-12.
- UW profiles are stamped at the base for dowels and screws.
Properties and scope
- Designed for interior use.
- In classic drywall constructions, the UW profile is used as a guide.
- Used in partition constructions as horizontal guides, for wall cladding, for creation of shaft walls, freely fastened self-supporting (wall-based) ceilings and curved constructions.
The color tones on the screen are reproduced electronically. They may differ from the actual color tone because our color perception is affected by the surface of the material, glare, lighting, and other factors. To accurately determine a color shade, we recommend that you use real color shade catalogs, always be confident in your choice, and use the color shade catalogs in an environment or conditions similar to those for which you choose a color.
The image of the product is informative. Specifications may vary depending on configuration and size. Fittings and their location may vary.
Contact our customer service for further information www.ventum.lv
Email: [email protected], contact number: +371 25438606 (doors and furniture), +371 29 383 382 (building supplies)
Similar products
