Description
Weber.therm 310, a flexible, fiberglass-bonded mortar for gluing and reinforcing mortars, is used in thin-layer facade insulation systems. Suitable for gluing and reinforcing mineral wool and expanded polystyrene on mineral substrates. Mortar weber.therm 310 can be used as a leveling plaster with a layer thickness of 2-10 mm for monolithic concrete, lightweight concrete blocks and brick substrates for indoor and outdoor use.
Positive properties
- Reinforced with fibers
- Vapor permeable
- 100 frost resistance cycles tested
- For use with certified systems WeberTherm (ETA 16/0964) and WeberMin (ETA 16/0965)
- Can be applied manually or mechanically
Technical data
- Consumption:
- on average - 1.5 kg / m² / 1 mm
- for gluing thermal insulation sheets - 4-5 kg / m²
- for the formation of the reinforcement layer - 6-8 kg / m²
- Layer thickness:
- for plastering - 2-10 mm
- for the creation of an reinforcing layer in the facade systems WeberTherm and WeberMin - 5-7 mm
- Fraction (grain) size - 0-1 mm
- The amount of water to be added is 5-6 liters / 25 kg
- Development time after mixing with water - 2 hours
- Application temperature - + 5 °... + 30 ° C
- Shelf life - 12 months
The color tones on the screen are reproduced electronically. They may differ from the actual color tone because our color perception is affected by the surface of the material, glare, lighting, and other factors. To accurately determine a color shade, we recommend that you use real color shade catalogs, always be confident in your choice, and use the color shade catalogs in an environment or conditions similar to those for which you choose a color.
The image of the product is informative. Specifications may vary depending on configuration and size. Fittings and their location may vary.
Contact our customer service for further information www.ventum.lv
Email: [email protected], contact number: +371 25438606 (doors and furniture), +371 29 383 382 (building supplies)
Similar products
