Product code:
V2412
available
129.60€
ELT-PEFOIL 200 - UV-stabilized 200 microns thick polyethylene film. Used as vapour barrier for walls and roofs. The material is stabilized against natural deterioration and ultraviolet radiation.
10cm-15cm overlaps should be taped or fused. The recommended adhesive tape – Tyvek Butil tape.
Properties:
Material: 100 % polyethylene (LDPE)
Weight, g/m2: 185
Thickness, mm: 0.2
Air layer equivalent to diffusion of water vapour Sd (DIN 52615), m: 62
Amount of UV stabilizer, %: 1
Fire resistance (EN 113501-1): F
Flow limit, MPa: 9.8
Strength limit, MPa: 13.7
Relative elongation to decay, %: 500
Weight, g/m2: 185
Thickness, mm: 0.2
Air layer equivalent to diffusion of water vapour Sd (DIN 52615), m: 62
Amount of UV stabilizer, %: 1
Fire resistance (EN 113501-1): F
Flow limit, MPa: 9.8
Strength limit, MPa: 13.7
Relative elongation to decay, %: 500
Roll parameters:
Width, cm: 300
Length, flow.m: 45
Area, m2: 135
Weight, kg: 25
Length, flow.m: 45
Area, m2: 135
Weight, kg: 25
The color tones on the screen are reproduced electronically. They may differ from the actual color tone because our color perception is affected by the surface of the material, glare, lighting, and other factors. To accurately determine a color shade, we recommend that you use real color shade catalogs, always be confident in your choice, and use the color shade catalogs in an environment or conditions similar to those for which you choose a color.
The image of the product is informative. Specifications may vary depending on configuration and size. Fittings and their location may vary.
Contact our customer service for further information www.ventum.lv
Email: [email protected], contact number: +371 25438606 (doors and furniture), +371 29 383 382 (building supplies)
Similar products
