Fortex THERMO for heated warm floors - foil with a markings for the warm floor is used as a heat reflector. Foil film with marking is placed on a heater, under heating pipes, or a cable, as a reflective insulation. The film has a mark 10x10 cm, making it easier to put pipes or cables.
Properties:
Mass per unit area: 100 ± 20% g/m2
Water tightness (2 kPa): No permeability
Resistance to water vapour permeability: 1.55 x 1011 m².s.Pa/kg
Impact resistance: 150 mm
Low temperature flexibility: (-30 °C)
Durability: water tightness after artificial aging
Reaction to fire: Class F
Water tightness (2 kPa): No permeability
Resistance to water vapour permeability: 1.55 x 1011 m².s.Pa/kg
Impact resistance: 150 mm
Low temperature flexibility: (-30 °C)
Durability: water tightness after artificial aging
Reaction to fire: Class F
Roll parameters:
Width, cm: 100
Length, flow.m: 50
Area, m2: 50
Length, flow.m: 50
Area, m2: 50
The color tones on the screen are reproduced electronically. They may differ from the actual color tone because our color perception is affected by the surface of the material, glare, lighting, and other factors. To accurately determine a color shade, we recommend that you use real color shade catalogs, always be confident in your choice, and use the color shade catalogs in an environment or conditions similar to those for which you choose a color.
The image of the product is informative. Specifications may vary depending on configuration and size. Fittings and their location may vary.
Contact our customer service for further information www.ventum.lv
Email: [email protected], contact number: +371 25438606 (doors and furniture), +371 29 383 382 (building supplies)
Similar products
