FIBO lintels The most convenient solution for assembling bay overlaps in external walls of FIBO Efekt blocks and other load-bearing structures is FIBO lintels. They are expanded clay concrete beams made by the vibropressing process with spatial, corrosion-resistant steel reinforcement. The widths and properties of FIBO lintels are fully coordinated with FIBO Efekt blocks. The lintel height of 185 mm corresponds to the 200 mm, 250 mm and 300 mm wide FIBO Efekt blocks.
FIBO lintels should always be installed with the printed side down.
FIBO lintels should be supported on the masonry with a 250mm long "shoulder".
Size
- Width - 200 mm
- Height - 185 mm
- Length - 1190, 1490, 1790, 2090, 2390, 2690, 2990 mm
Characteristics
- It has been proven in tests that one row of Fibo Efekt blocks built on the lintel increases the bearing capacity of the lintel by 1.5 times!
- FIBO lintels are building blocks made by the vibropressing process, reinforced with spatial steel reinforcement
- Dimensions coordinated with FIBO blocks.
- Lightness - assembly can be done by hand.
- Does not form a “cold bridge” (λ=0.2 W/mK).
- Same features as FIBO blocks, which reduce the possibility of cracks.
The color tones on the screen are reproduced electronically. They may differ from the actual color tone because our color perception is affected by the surface of the material, glare, lighting, and other factors. To accurately determine a color shade, we recommend that you use real color shade catalogs, always be confident in your choice, and use the color shade catalogs in an environment or conditions similar to those for which you choose a color.
The image of the product is informative. Specifications may vary depending on configuration and size. Fittings and their location may vary.
Contact our customer service for further information www.ventum.lv
Email: e-shop@ventum.lv, contact number: +371 25438606 (doors and furniture), +371 29 383 382 (building supplies)
Similar products
